With many points checked some subject against the visit, the road worthiness is a real checklist! To avoid the inconvenience of a visit-cons associated with necessary and sometimes costly repairs,the easiest way is to anticipate before the technical inspection.Since 1992, all light vehicles under 3.5 tonnes over the age of 4 years must pass technical inspection every 2 years.Obligations of road worthiness have been revised upwards in 2012.
Checks Achievable By Itself
In most cases, when a vehicle is properly maintained, the control technique is a mere formality.However, there are pitfalls “stupid” that can cause a cons-visit as tires, a defective bulb, a loose license plate.By a simple turn of the vehicle well in advance of the date of inspection technique, you will surely save you a cons-visit.Step by step starting from 10 mechanical functions defined by the technical control, here’s what you can check for yourself:
The absence of registration, the invisibility or the deterioration of the plate is the 4th leading cause of resetting the control technique.To be safe on that side, make sure your plate numbers are identical to the registration certificate (formerly gray card).Same for the nameplate information and hit the cold frame.Also make sure that your plates are not damaged unreadable.Test fixtures.Concordance with the gray card should be perfect as the number of places that power engine.The odometer must be operational: the operator must be able to record the mileage.
Braking is one of the key elements of the safety of a vehicle.Without being an expert in mechanics, you can test the effectiveness of the parking brake (handbrake), the level of brake fluid, the hardness of the brake pedal.By sliding under the vehicle, you can also check the status of disks and brake pads.If you have an ABS system or equivalent, take the road and make sure it works by taking good care of it there is no one behind you.If a witness brake lights continuously or intermittently, made emergency repairs your vehicle! Besides the fact that it will not pass the technical inspection, it becomes very dangerous to use.
Direction of the vehicle
The management is also part of the lifeblood of your vehicle.Without being an expert, you can check for hard turning point, the effectiveness of the steering lock.Taking the wheel in a straight line, release the steering wheel a few seconds and check that your vehicle continues in a straight line.The same test can be done during braking.These tests can demonstrate a concern for management, but also more likely a bad tire balancing.
Visibility
Visibility control points of the vehicle can be checked without being an expert.These include the condition of the windshield (crack search in particular), the visibility provided by other windows, mirrors and settings of their condition, the poor condition of wipers or their non-functioning.
Structure and Bodywork
Again, some points can be easily checked by a non-professional as including the presence of corrosion on the floor, wheel arches, sills.All doors must open! The hood, fenders, bumper must not have projecting parts.
Facilities
Safety equipment of the vehicle to pass technical inspection must be functional.These include seat belts, the alarm (horn).Seat fixations should be checked as well as the battery, the possible hitch.
Mechanical Parts
Technical control points on the mechanical parts are quite complex to check for a non-professional.Generally, leaks of engine, gearbox or the bridge are not subject against the visit.By cons, any fuel leak is sanctioned.An exhaust leaking light passes control technique but poor attachment been a cons-visit.
Pollution, Noise Level
Home testing for pollution are impossible.Unfortunately, under the technical control, any abnormality been a cons-visit.The wisest course is in doubt on an old vehicle to rely on a professional mechanic will conduct the necessary adjustments before passing control technique.
